The router is one of the most versatile woodworking power tools available. It can be used to automate traditional carpentry techniques such as creating mortice & tenon or dovetail joints right through to trimming contemporary materials like engineered timber or laminates. The versatility of this router is improved considerably by the multitude of router bits and jigs that are available. Therefore, it’s no surprise that a router can be seen in most respectable carpenters’ tool vaults. Buying a router can be a challenging task. There’s a lot of technical jargon to understand. In this, we have summarised a few things to consider when you are considering investing in a router. It is, by no means, an exhaustive listing. Broadly speaking, routers could be divided into three categories which are heavy duty, medium duty, and light duty. The light duty routers are sometimes known as “handheld” routers. Check out the following website, if you’re searching for more details about 4g wireless router.
Light duty routers are just really designed for basic operations such as trimming. They are lightweight, not very effective and are, therefore, intended for infrequent use. Medium duty routers are more lighter and powerful. They can be used to perform more demanding tasks and are designed to be used regularly. Heavy duty routers are on peak of the range varieties. They are the most powerful and are designed to be used for daily milling operations. They can be used for hand milling and may also be table-mounted for use as stationary routers. Collet corresponds to where the router bit is connected to the router. The collet diameter is equal to the direction bit diameter. They are available in two sizes. The size of the piece also determines how much material can be routed out in one pass and thus impacts the strain that is put on the router’s motor.
It would be pertinent to navigate through the extensive variety of router bits available in the marketplace before deciding which router to purchase. Routers usually come with variable speed control. This variable rate corresponds to how quickly the motor, and therefore, the router bit turns. While this isn’t a crucial requirement, it is worth paying a bit extra for it if your budget allows. As we heard earlier, the bigger the router bit, the more stuff it will remove with each move. It is good practice to decrease the speed of the motor when using larger pieces to decrease the strain on the bit and, in the end, the motor. Soft start is a feature usually found in medium to heavy-duty routers. The soft start means that the when the motor is started, it slowly increases in speed. This is a useful feature to have since it means that the tool won’t push or pull abruptly as you begin routing. This feature makes the entire routing operation smoother and can prolong the life span of the router and router bits. Again, it’s well worth going to get a router with this feature, if you budget permits.